AGM Clip-On Front Scope Mount #3 (46,7-50mm) 6606SM31

You will need this AGM front mount #3 to attach the clip-on front scopes AGM Comanche-22 (night vision) or the AGM Rattler TC (thermal) to your daytime rifle scope. This mounting concerns AGM article 6606SM31 and is suitable for the rifle scopes with an outer diameter between 46.7 and 50 mm (five adapters included). In general, these are often rifle scopes with a objective lens diameter of 40, 42 or 44mm.

Selecting the right adapter ring

When determining the correct adapter ring, you must count with the outer size of your rifle scope, including body, on the side of the objective lens. So this is not about the diameter of the lens itself, but basically these riflescopes often have a 40, 42 or 44mm lens. This #3 mount is only suitable for rifle scopes with the following outer diameters:
• 46.7mm
• 48 and 48.7 mm
• 49 and 49.5 mm
• 50 mm
Does your rifle scope have a different outer diameter? Then check out the other adapter rings in the optional accessories. In doubt about which size you should have? Please feel free to reach out to us.

How does it work?

The AGM mount #3 comes with five different adapters. You use the adapter that matches the outside diameter of your rifle scope. You place this in the mount. Then you "open" the mount by turning the screw. You slide the assembly over the housing of your rifle scope and then screw it back on. Finally, you screw the AGM Comanche-22 or AGM Rattler TC easily and firmly into the thread of this mounting.

Application AGM Clip-On Mount #3 (6606SM31)

This mount is the essential piece to attach an AGM clip-on to your conventional rifle scope (e.g., from Vortex, Konus, Swarovski, Zeiss, Hawke, Meopta or Leupold).
This adapter is designed for use with the AGM Comanche-22 and the AGM Rattler TC series. The Comanche-22 night vision clip-on allows you to turn your rifle scope into a night vision scope. The AGM Rattler TC thermal imaging clip-on allows you to turn your rifle scope into a thermal imaging rifle scope. This mount is easy to attach and disassemble.
 

1x AGM Clip-On Front Scope Mount #3 (6606SM31);1x Adapter for 47.6mm;1x Adapter for 48mm;1x Adapter for 49.5mm;1x Adapter for 50mm